Model: 0606267299166
10L high-temperature oil bath circulator with a range of RT to 300°C, 0.1°C control accuracy, and a 15 L/min external pump.
This equipment is sold for lawful use only. Buyer is responsible for compliance with all applicable regulations.
This MTST unit is a high-temperature thermostatic oil bath circulator with a 10 L liquid reservoir and an operating range from room temperature up to 300°C. It uses a 2 kW heater and an LCD interface to set and monitor bath temperature.
An external circulation pump rated at 15 L/min allows heated fluid to be delivered to connected equipment such as jacketed reactors or other vessels requiring elevated temperature control. The controller supports measured-value deviation correction with a stated accuracy and fluctuation of ±0.1°C.
The circulator is intended for laboratory temperature-control tasks where a stable high-temperature heat-transfer fluid is required. It runs on 220 V and measures 320 × 370 × 470 mm.
The unit heats fluid in its 10 L reservoir using a 2 kW heating element, while a built-in pump circulates the fluid through external equipment at up to 15 L/min. The LCD controller regulates temperature with deviation correction, and an over-temperature protection function triggers an alarm and cuts off the load if the set limit is exceeded.
