1 / 14The MTST FD-10N-60C is a benchtop freeze dryer (lyophilizer) built around a condenser rated below -60°C and a vacuum capability below 10 (per the supplier specification). It combines a shelf-based drying chamber with manifold ports, allowing both solid materials and flask-held liquid samples to be processed.
The unit holds four trays measuring 200×4 with 70mm spacing, providing a drying area of roughly 0.12 and a water capture capacity of 3. It operates on 110V 60Hz and draws 850W.
This configuration suits laboratories that process both solid material on trays and liquid samples in flasks via the manifold.
Samples are first frozen, then placed under vacuum while the condenser, rated below -60°C, traps sublimated water vapor. The combination of low pressure and the cold condenser allows moisture to pass directly from solid to vapor, drying the material on the trays or in flasks attached to the manifold ports.
Model: FD-10N-60C
Benchtop freeze dryer with a -60°C condenser, four 200mm trays, and manifold ports for both flask and shelf drying.
This equipment is sold for lawful use only. Buyer is responsible for compliance with all applicable regulations.