1 / 2Model: FD-10N-60D
Benchtop freeze dryer with a −60°C condenser, three 200mm trays, and a top-press head for vial sealing under vacuum.
This equipment is sold for lawful use only. Buyer is responsible for compliance with all applicable regulations.
The MTST FD-10N-60D is a benchtop freeze dryer (lyophilizer) configured with three 200mm trays and a top-press head. It operates on 110V 60Hz at 850W and reaches a condenser temperature below −60°C with a vacuum level under 10.
The unit provides roughly 0.092 of drying area across its trays, spaced at 70mm, and supports a water capture of 3. The top-press design allows ampules or vials to be sealed under vacuum at the end of a cycle.
It is intended for research and small-batch laboratory work where samples need to be dried and held in a stable, low-moisture form.
Freeze drying removes moisture from a frozen sample by sublimation under vacuum. The sample is held below freezing while the condenser, operating below −60°C, traps released vapor, and the vacuum system maintains pressure under 10 to drive the process. The top-press head can seal vials or ampules under vacuum once drying is complete.