1 / 9The Swiben DZF-6010 is a vacuum drying oven with a 0.28 cubic foot chamber, intended for low-pressure drying and heating in a laboratory setting. The interior liner is 304 stainless steel, and the outer shell uses a spray-painted anti-corrosion finish.
The oven heats from approximately 10°C above ambient up to 200°C, with temperature stability of ±1.0°C and a display resolution of 0.1°C. A programmable timer covers 1 to 9999 minutes, and the unit can reach a vacuum level of 0.098 MPa.
It is suited for users who need to dry heat-sensitive materials at reduced pressure, where lower oxygen exposure and lower drying temperatures are useful.
The chamber is evacuated to a vacuum of up to 0.098 MPa, which lowers the boiling point of moisture and solvents so materials can dry at lower temperatures than at atmospheric pressure. Heating elements maintain the set temperature within ±1.0°C, while the built-in timer controls the drying cycle from 1 to 9999 minutes.
Model: DZF-6010(0.28CuFt)
Swiben DZF-6010 vacuum drying oven with a 304 stainless steel liner, 0.28 cu.ft chamber, and a heating range of RT+10 to 200°C.
This equipment is sold for lawful use only. Buyer is responsible for compliance with all applicable regulations.