High-temperature heated circulator with a 10L tank, RT to 300°C range, and an external circulation pump rated at 15 L/min for jacketed reactors and distillation setups.
This equipment is sold for lawful use only. Buyer is responsible for compliance with all applicable regulations.
The MTST 10L heated circulator is a high-temperature bath designed to supply and circulate heated water or oil to external lab equipment. It operates from room temperature up to 300°C, with a 2 kW heating element and a circulation pump delivering up to 15 L/min.
The unit holds 10L of working fluid and maintains temperature stability of ±0.1°C with the same display resolution. An LCD readout and a measured-value correction function support accurate setpoint control. It runs on 110V and measures 320 × 370 × 470 mm.
This circulator is intended for labs running jacketed reactors, high-temperature distillation, and similar processes that require uniform, controlled heating of connected equipment.
Working fluid (water or oil, depending on the target temperature) is heated in the 10L tank by a 2 kW element and pumped through an outlet line to external equipment such as a reactor jacket, then returned to the bath. A built-in over-temperature protection feature triggers an alarm and cuts the load when the set limit is exceeded. When using oil, the supplier notes the starting oil temperature should be at least 15° above the lowest temperature in the selected working range.
